Today I will teach you the method to remove spray paint from floors made with tiles. Newbies often get confused and hesitate to remove paint from the tiles, because they get scared that the tile’s surface will be damaged while doing the process of removing paint. But don’t worry here I have explained each step with a very easy-to-understand guide.
Removing paint from tile is generally easier than you think, especially when you’re working with a vintage find. In this post, I will explain the process on how to remove spray paint from tile surfaces. If you are planning to repaint tiles then best paint sprayer under 200 articles you must read. And if you need the best cordless paint sprayer for your work then I have also used and tested the best ones in the market.
Remember there are steps to follow depending on the kind of paint you’re trying to remove from the tiles – all of which can be found below. If you are looking for best HVLP spray guns then I have a list of the best ones that I have chosen after testing. And if you are interested in buying best paint sprayers for cars then you should read this guide.
Just don’t forget that if the tiles have been coated in bad condition overall, like cracks or flakes, then removing layers and layers of paint might just make matters worse!
- 1 Tools required to do the job
- 2 Method 1: By scraping it off
- 3 Method 3: Heating and scraping method
- 4 Method 3: Use of Paint Remover
- 5 FAQ’s
- 6 Conclusion
Tools required to do the job
Method 1: By scraping it off
Chances are at some point you will be painting your walls and if you take a break to grab a snack or just generally forget to stay on top of things, there’s a good chance that paint will get everywhere! To remove the splatters from flat surfaces, try using Bounty paper towels. These similar methods are used to remove paint from stainless steel.
Dampen the paper towels and wipe off excess paint. Should dried-on paint prove stubborn, however, move on to Method 2. And of course, if trying to scrape spots for decades, wear a dust mask and make sure it fits correctly so you don’t lead yourself astray.
When beginning, try your tile first in a less conspicuous area to ensure that it does not harm the finish (i.e. bathroom wallpaper). Apply tile adhesive with a short, firm and even pressure, distributing the adheres evenly over entire surface with slight pressure at edges.
If adhesive does not come up and cannot be removed when the tile is slid from top to bottom or side to side against wall surface, proceed with confidence. However, if you feel any pressure cracks appear on the painted surface or have visible flaking at all.
Stop immediately; you may have done irreversible damage to your wall which isn’t worth compromising for mosaic tile installation. Wipe the tiles clean with the damp rag. Scrape off any splatters and wipe them off.
Method 3: Heating and scraping method
Heating tiles is an easy way to remove paint that has become too dry. Heating paint causes the moisture in it to evaporate and loosen the bond with the tile. If you can’t find your heat gun, a hair dryer or even a simple lighter will do the trick! Don’t try to heat too large of an area at once; instead, focus on smaller areas of about 1 square foot at a time.
Holding anything that is made of plastic or wood (avoid metal!) over top of the tile run your device over it until it has loosened up enough to lift right off.
Remember, if you are breathing in harmful dust as you work, wear a mask if you don’t want to hurt yourself while doing this project. Remember to always keep moving while heating so nothing gets burned!
Method 3: Use of Paint Remover
If your tile is older than 20 years, you’re going to need a conservation-rated paint remover. To find the most effective option for your project, show a sample of your tile and glazing to a professional on staff at your hardware store; if you aren’t sure what kind of remover you need, ask for suggestions from more than one employee!
Regardless of what paint remover you end up using, make sure that the area that you are working in is well-ventilated by opening windows and operating fans throughout the day so as to not damage any other parts of your home or injure yourself from exposure to chemical fumes!
In an inconspicuous area, check to see if the tile can handle the paint remover. Apply the paint remover as recommended by the packaging and let it sit for the recommended dwell time using a clean rag or sponge. Scrape off any remaining paint with a plastic scraper at a 45-degree angle. If there’s no damage to the glaze, you can continue on to the rest of the tile.
Otherwise you’ll have to reschedule painting for another day (or maybe even later that same day?). Simply wipe clean with some warm soapy water and dry ones it has been cleaned thoroughly with a clean rag/sponge, etc.
Important tip regarding grout
White grout between tiles can be a stubborn problem that is made all the more difficult when paint has permeated into the lines.
While it’s no easy feat to remove paint stains from the grout, our recommendation is: first, if you’re going for an all-natural removal method, use a citrus-based paint remover with a toothbrush (you can ask your local home improvement store to loan out their fancy cleaning tools) and repeat until clean.
Here it is, the complete step by step guide to remove spray paint from your tiles. I know the process takes time but when you will do exactly which I mentioned in this post then you will for sure get satisfactory results from these methods of mine. If you found anything confusing then let me know down here in the comments section I will answer your query as soon as possible.