How to clean airless paint sprayer

In this blog post today, I will cover the topic of the airless paint sprayer cleaning process.

This step-by-step guide will help those newbies and beginners who want to clean airless paint sprayers at home by themselves but don’t know the complete process.

cleaning airless paint sprayer

Don’t worry at all cause the process is pretty simple to apply and it will give you the results which you want after completing the procedure.

Cleaning your airless sprayer after every job is important! It helps keep your machine in good working condition, so you and others can rely on it to get the job done right.

And half of our repair work comes from issues that could have been prevented by proper care.


How to clean airless paint sprayer

Airless paint sprayers are used for businesses, both professional and industrial. They are very useful in a lot of applications, from making custom signs to building homes.

It would be wise to know how to maintain them properly in order to keep their use efficient and safe.

One of the most important things to remember about airless paint sprayers is that the spray tips are the most delicate part of the machine.

They are very important because those are the parts that actually get into the paint. They are also the parts that can clog up the line or dry out if they aren’t taken care of properly.

Steps to clean airless paint sprayer

To clean your airless paint sprayer, you’ll need to start by disassembling the unit and removing the pump. Next, use a solvent-based cleaner to clean the pump, being sure to rinse it well.

Once the pump is clean, you can reassemble the unit and begin flushing the hose. To do this, simply run water through the hose until it comes out clean.

how to clean airless paint sprayer

Finally, you’ll need to clean the nozzle. To do this, remove it from the unit and soak it in a solvent-based cleaner.

Once it’s clean, you can reattach it to the unit and get back to painting.

What can I use to clean my airless spray gun?

Paint thinner and lacquer thinner are two common materials for cleaning airless paint sprayers.

Paint thinner is a synthetic hydrocarbon solvent that is safe for most plastics, and it evaporates quickly.

This is a good choice for most projects, so it is a great solvent to have around the house, especially if you work on painting a lot of furniture, doors, and other household items.

How do you clean an airless paint sprayer with latex?

Cleaning an airless paint sprayer with latex is fairly easy. You will need to use water and a degreasing tool like Simple Green or 409. 

The first step is to remove the paint from the paint sprayer and wait for it to dry. Next, use a degreaser and a clean rag to rub over the surface of the paint sprayer.

Another option is to skip the cleaning solution and simply run the sprayer under warm water.

The warm water will cause the paint to soften up, which is why you should avoid this option if you are using latex paint.

Allow the paint sprayer to dry thoroughly before using it again.

How do you clean a clogged airless paint sprayer?

The first thing to try is to open the valve and blast a hose in. If that doesn’t work you will be left with two options:

1) Take the paint pump apart and clean it and

2) replace the pump. If you are handy you can try taking it apart. Otherwise, if you have any other airless pumps or air compressors lying around that you can use then you might want to try this before you invest in a new pump.

The only other option is to buy a new paint pump, but don’t let this scare you. It’s not that expensive and the new pump probably comes with a new needle and nozzle.

Why does my paint sprayer keep clogging?

Sometimes a clogged paint sprayer can be nothing more than a simple air bubble in the hose, which is often caused by a change in the direction of the spray, or the hose being moved too hard.

Every time you change direction, you should tap out the hose before continuing to spray.

A clog can also be the result of hardened paint in the hose. You should try using an air gun to blow the hardened paint out of the hose.

You can also try spraying with all the airlines removed. If your sprayer is still clogging, then you may need to look for a paint sprayer clog kit or call for professional help.

How do I clean an airless sprayer?

To clean an airless sprayer, you should first flush the pump and hose with mineral spirits or paint thinner to remove any remaining paint.

Next, clean the spray gun by disassembling it and using a brush and cleaning solution to scrub all surfaces.

Finally, reassemble the gun and run water through the system to rinse away any remaining cleaning solution. It’s important to also check and replace the spray tip if it is worn or damaged.

Can you use paint thinner to clean airless paint sprayer?

Yes, paint thinner or mineral spirits can be used to clean an airless paint sprayer.

They are commonly used to break down and dissolve the paint that is left in the pump and hose, making it easier to flush out the system.

It’s important to use a paint thinner that is compatible with the type of paint you were using.

And to make sure that you follow the manufacturer’s instructions for cleaning your specific model of the sprayer.

It’s also important to note that you should clean the sprayer immediately after use, as paint that is allowed to dry in the system can be much harder to remove.

Also, after cleaning with paint thinner, you should run clean water through the system to remove any remaining residue.

Can you clean airless sprayer with water?

Yes, it is possible to clean an airless sprayer with water, but it is usually more effective to use a cleaning solution, such as mineral spirits or paint thinner, to break down and dissolve the paint.

Water alone may not be able to remove all the paint and other debris that may be stuck in the sprayer.

However, it is important to use clean water to rinse the sprayer thoroughly after cleaning it with a cleaning solution to ensure that all of the solvents has been removed from the system.

It’s also important to note that using water to clean an airless sprayer may not be suitable for some types of paint, such as oil-based paint.

In those cases, it’s recommended to use a cleaning solution that is compatible with the paint you used and follow the manufacturer’s instructions.

What is the easiest way to clean a paint sprayer?

The easiest way to clean a paint sprayer will depend on the type of sprayer you are using and the type of paint you were spraying.

In general, the most efficient way to clean a paint sprayer is to do it immediately after use, while the paint is still wet.

This will make it easier to remove the paint and prevent it from drying and hardening in the sprayer.

For airless sprayers, one of the easiest ways to clean it is by using a cleaning solution such as mineral spirits or paint thinner.

You can flush the pump and hose with the cleaning solution, disassemble the spray gun and clean it with a brush, then reassemble and run water through the system to rinse.

For other types of paint sprayers such as HVLP, it’s best to follow the manufacturer’s instructions for cleaning the specific model you are using.

In general, it’s important to read the user manual and follow the manufacturer’s instructions for cleaning the paint sprayer.

To ensure that you are using the right cleaning solution and method for your specific model.

Final thoughts on the airless paint sprayer

I hope you have enjoyed my post on how to clean an airless paint sprayer.

Remember, if you have any questions on how to clean an airless paint sprayer or need airless paint sprayer parts, please feel free to contact us anytime in the comments section.

Thanks for reading!

Matthew Edward

Matthew Edward is a professional painter who loves to paint and wants to share useful tips and tricks which he had learned in many years of experience in painting. He also used many products that can be used for painting he has tried and tested each and every product to give an unbias opinion about it in his review. This blog is very useful for those newbies who want to learn painting without making mistakes.

Leave a Comment