As a Graco SG3 sprayer, I’m the one who is in charge of deciding which paint gun is best for me.
Whether it’s an SG2 or an SG3, there are some major differences that you might not be aware of- and they can make all the difference when it comes to your painting experience.
If you’re someone who has never used a spray gun before, then this article may help you out!
It will give you some insight into what to look for in terms of features and benefits so that you can find the perfect fit for your needs.
Graco sg2 vs sg3 review
The first thing I want to mention is the fact that both guns have different types of trigger options offered on them: slide triggers or pistol grips.
The type that you choose will be up to you, but it really comes down to the size of your hands! For smaller hands, I recommend a slide-trigger gun.
The reason is that this type of trigger requires less force and less movement in order to pull the sprayer off and on which can lead to more control and better results.
I am going to share my experience with these spray guns with you in this post of mine.
I have tested a lot of spray guns and found out their pros and cons and here, in this case, I will tell you which one is best to use for your work.
Graco sg2 vs sg3
Graco sg2
- Its maintenance is quite simple
- I used a safety lock and I was satisfied with its use
- Filter helps to reduce clogging
- Max PSI of 3600
- Some found the design inferior
The Graco 243011 SG2 Spray Gun is made with a thumb-engaged safety lock to prevent misfiring while not spraying.
The maximum operating pressure of 3600 PSI and the replaceable gun needle will keep maintenance simple.
This sprayer is ideal for homeowners and DIYers who are looking for an efficient way to paint their homes or do other projects.
It can be used with Magnum and Graco paint sprayers, as well as many other brands.
This spray gun comes with a replaceable in-handle filter which reduces tip clogging and makes clean-up and maintenance easy.
Replaceable gun needle for simple maintenance and increased performance over time Built-in filter made of stainless steel mesh to reduce tip clogging.
And increase airflow when painting Dual finger trigger allows you to use either the right or left hand to spray Draws material from one-quart
Or five-gallon pails safely Can be used with a water base, oil-based paints, stains, and varnishes Can also be used on decks, fences, home siding, and furniture Ideal for homeowners and DIYers.
I have used it with Magnum and Graco paint sprayers and this had been quite a good choice for me too as they have mentioned in their details.
I found it to be an excellent choice for homeowners and for DIYers for spraying a variety of coatings.
Its pressure is around 3,600 PSI which I admire because it is a pretty good thing to consider while purchasing this paint sprayer.
Graco 243012 Airless Spray Gun, SG3
- Efficient design philosophy used
- PSI of 3600 provided
- It can be used with most paints
- In-handle Filter improves the finish
- Expensive than sg2
The Graco 243012 Airless Spray Gun is ideal for spraying a variety of coatings including primers, sealants, stains, and paints.
The spray gun is lightweight and easy to use, making it perfect for DIY homeowners handymen, and professional painters alike.
A full 4-finger trigger with light smooth pull provides control and comfort while reducing hand fatigue.
Thumb-engaged safety lock allows you to lock the handle when not spraying for safety.
Maximum operating pressure of 3600 PSI delivers superior performance on a variety of coatings. 1/4 in. NPT air inlet ensures compatibility with a wide range of compressors.
The Graco 243012 Airless Spray Gun is ideal for projects around the home or office. The spray gun is easy to use and delivers superior performance on a variety of coatings.
With a 243012 Spray Gun, you’ll be able to spend more time finishing your project and less time mixing paint.
I tried to replace the needle which is replaceable and it was very simple to detach and attach it again to the hose and it was ready to use again in no time.
It didn’t take so much time for me because I am a professional painter who tries a lot of stuff.
I used its thumb lock and it worked well and did what it is made for. Whenever I wanted to stop the work I just engaged the safety thumb lock and locked the handle.
Graco sg2 vs Graco sg3 comparison. Which one is best to use?
This article will compare Graco’s SG2 and 3 paint guns, which are both great for different reasons.
The first thing you might notice about these two models is that they look quite similar.
This could be because of their similarities in functionality or design preferences on behalf of the manufacturer (Gracot%).
One interesting difference between them though becomes clearer when we consider their respective features lists:
Whereas projector plus comes equipped with all of the basics you might need to get started with paint spraying.
Such as a gravity-fed cup and adjustable nozzle, the SG3 offers a number of upgrades.
For one, the SG3’s nozzle is precision-machined for improved accuracy, and it also comes with an air regulator for more consistent airflow and less overspray.
Additionally, the SG3’s cup is larger (twenty ounces as opposed to the projector plus’s fourteen-ounce capacity), which can be advantageous if you’re working on a larger project.
Finally, the SG3 also includes an improved fan design that helps keep the work area cooler – something that could be especially important if you’re using an air compressor to power the gun.
So, which of these two paint guns is better for you? Ultimately, it depends on your needs as a painter.
If you’re looking for a basic model that will get the job done without too many bells and whistles, a projector plus would be a good choice.
But if you’re looking for a more advanced paint sprayer that will help you get the most out of your work, SG3 is a good choice.
Manufacturer
Graco has been around since 1920, which means they’ve seen some improvement in their products over time.
Their commitment to innovation can be seen with all of these great features that are available on current models like the infant changing table or paint roller holder.
When compared against other brands who offer similar functionality but less comfortability (like Simplicity)
It’s easy to see why Graco ranks so highly among painters everywhere.
The infant changing table is a perfect example of the features that set Graco apart. With an extra-large changing surface, it’s easy to change your baby even if you’re in a hurry.
Plus, the built-in organizer keeps all of your supplies within reach, so you don’t have to search for them while you’re trying to take care of your child.
Compatibility and comfort
Graco’s SG2 and 3 paint sprayers are both great for any DIY painter. They’re easy to use and have a durable design that can handle most jobs with ease (including delicate ones).
And offer plenty of benefits over traditional methods like this one here where you don’t need an extra set-up
Or someone else powerful holding onto your tool while working on something else nearby – not only does it take less time but also leaves more room in general around building projects.
Affordability
The Graco SG2 and 3 are both great options for spray gun owners, but if you’re looking to save money on your purchase then the older model may be more affordable.
The difference in price isn’t substantial though so it will depend upon what upgrades or accessories might interest someone most when deciding which one they want.
The Graco sg2 and SG3 both use the Magnum sprayer system, but they are sold separately.
The price difference isn’t huge between these two models though so it really just depends on what premium features you want for your baby’s nursery.
Design
The Graco sg2 and 3 are two of the best-selling brands in sprayers.
In terms of cosmetic touches, they look almost identical but there’s one major difference between these machines.
The SG3 has been tweaked slightly more ergonomic which means during long hours on their job it’ll be just a little bit easier to use while still getting great results!
And with a swivel hose attachment, you can adjust your position without worrying about any pesky kinks or coils taking over-so go ahead.
And take advantage today by purchasing this fantastic product from us here at handled Heavy Duty Fertilizers.
Some common features in both of these sprayers
- Both guns have safeguard locking systems in them to stop the paint
- Both have Four finger trigger system for better efficiency
- Graco sg2 and 3 have a great outlook and cosmetic touch
- Same elegant design in both of them and are comfortable
Users’ Opinion on this comparison:
Users are mostly very fond of both these spray guns. People appreciate the fact that they’re easy to maintain and clean.
Which naturally is always a big plus – but there’s more than meets the eye!
You can use them with latex paints or oil-based cleaners in addition to versatile capabilities like staining/varnishing.
It doesn’t matter what your project requires because these machines will get you through every step without a hassle.
Some people have reported that the tip locks up a little bit, but this doesn’t seem to be an issue for most users.
In general, both products Received very, similar feedback with people noticing how friendly and easy-to-use Graco’s SG3 interface is in contrast to other competing products.
In today’s market while still happy about their purchase decision even though there were some minor drawbacks here or there depending on who you ask.
What are the Differences between Graco SG2 and SG3
- The SG3 is a higher-end model than the SG2 and has more power and features.
- The SG3 has a higher maximum flow rate and can spray more paint per minute than the SG2
- The SG3 has a more powerful motor and can handle thicker coatings and materials than the SG2
- The SG3 has a more durable and rugged design than the SG2
- The SG3 has a larger tip size range than the SG2
- The SG3 is generally more expensive than the SG2
- The SG3 has a more advanced spray tip technology
- The SG3 has a more advanced control system
- The SG3 has a more advanced pressure control system
- The SG3 has a more advanced cleaning system
- The SG3 is designed for more professional and industrial use than the SG2
It’s important to note that these differences may vary depending on the specific model and version. It’s important to check the product specification before making a purchase.
Similarities between Graco SG2 and SG3
- Both are airless paint sprayers made by Graco
- Both use a piston pump to pressurize the paint
- Both have the ability to adjust the pressure and control the spray pattern
- Both have a similar design
- Both are corded and electric powered
- Both are suitable for medium-duty to heavy-duty painting projects
- Both are designed for both indoor and outdoor use
- Both have similar weights and size
- Both have similar hose lengths and tip size range
- Both have similar warranty coverage
The Graco SG2 and SG3 are both airless paint sprayers made by Graco, a company that specializes in manufacturing equipment for the painting and coating industry.
Both sprayers use a piston pump to pressurize the paint, which is then atomized by a spray tip and applied to the surface.
Both models also have similar features such as the ability to adjust the pressure, control the spray pattern and have a similar design.
They are both corded and electric-powered. The main difference between the two models is the SG3 is a higher-end model with more power and features.
Graco SG2 vs SG3 Spray Gun – Which One to Choose?
The choice between the Graco SG2 and SG3 spray guns will depend on your specific needs and the type of projects you will be working on.
If you are a professional painter or contractor and are looking for a spray gun that can handle heavy-duty and industrial painting projects, the Graco SG3 is the better choice.
With its more powerful motor, larger tip size range, and advanced features, the SG3 is built to handle thicker coatings and materials and can handle more demanding painting projects.
On the other hand, if you are a DIYer or a hobbyist and will be using the spray gun for lighter-duty projects such as painting a house, fences, decks, or furniture, the Graco SG2 is a great option.
It’s a reliable and efficient tool that will get the job done at a more affordable price.
In summary, if you’re looking for a professional tool for heavy-duty projects and you want the most advanced features.
Go for the Graco SG3, but if you’re looking for a reliable tool for light-duty projects at a more affordable price, the Graco SG2 is the better choice.
Graco SG2 VS SG3: Comparison of Different Features
Graco SG2 and SG3 are both airless paint sprayers made by Graco, a company that specializes in manufacturing equipment for the painting and coating industry.
Both sprayers use a piston pump to pressurize the paint, which is then atomized by a spray tip and applied to the surface.
However, there are some key differences between the two models when it comes to their features.
Power:
- SG2: Less powerful motor than the SG3
- SG3: More powerful motor than the SG2, can handle thicker coatings and materials.
Flow Rate:
- SG2: Lower maximum flow rate than the SG3
- SG3: Higher maximum flow rate than SG2, can spray more paint per minute.
Tip Size Range:
- SG2: Smaller tip size range than the SG3
- SG3: Larger tip size range than the SG2
Control System:
- SG2: Basic control system
- SG3: Advanced control system with more precise pressure control
Spray tip Technology:
- SG2: Standard spray tip technology
- SG3: Advanced spray tip technology that allows for more precise and consistent spray patterns
Cleaning System:
- SG2: Basic cleaning system
- SG3: Advanced cleaning system for easier and more efficient cleaning
Price:
- SG2: More affordable than the SG3
- SG3: More expensive than the SG2
In summary, the Graco SG3 is a more powerful, versatile, and advanced tool than the Graco SG2, with more features, and more precise control, but also comes with a higher price.
The SG2 is more suitable for light-duty projects and more affordable but less powerful, precise, and versatile.
Conclusion on raco sg2 vs sg3
We’ve talked about the differences between SG2 and SG3. If you are on a budget, or if you have some extra cash to spend.
It is worth considering upgrading your spray gun to the newer model for its tangling prevention technology.
SG3’s advanced technology might be the deciding factor for some, while others might lean towards the tried and true SG2.
At the end of the day, both guns are incredible pieces of equipment that are sure to help you with your spraying needs!
So whichever one you choose, rest assured that you’re getting a top-of-the-line product.
If you are still on the fence about which one to buy, be sure to check out the video below for a more in-depth comparison between the two guns.
I hope this article was helpful in deciding which spray gun is right for you.
But remember that either choice will not disappoint-both guns are excellent products with great reviews!
Do you think that one of these Graco Spray Guns would be right for you? Let us know in the comments below.
Matthew Edward is a professional painter who loves to paint and wants to share useful tips and tricks which he had learned in many years of experience in painting. He also used many products that can be used for painting he has tried and tested each and every product to give an unbias opinion about it in his review. This blog is very useful for those newbies who want to learn painting without making mistakes.