How to spray paint a golf cart

Spray painting a golf cart might seem like an easy thing to do, but it can turn out to be a disaster if you don’t follow the right steps.

The fact that you need to work with a lot of chemicals makes it even more dangerous.

So, if you’re planning on doing your own spray painting, then make sure that you read this guide. You’ll learn how to do it right.

This guide is based on my experience which is of plenty of years that will help you to achieve the results which you want.


How to spray paint a golf cart?

Now I am gonna discuss all the steps which you need to follow in order to get those satisfactory results which you are imagining in your mind.

And believe me you can achieve those exceptional results. If you are a freshie then don’t miss any point in this guide.

Tools you need to spray paint golf cart

  • Spray paint
  • Golf cart
  • Gloves
  • Goggles
  • Respirator mask
  • Paint suit
  • Primer
  • Sandpaper/sanding block
  • Cleaning agent/dish soap/soapy water etc
  • Masking tape/newspaper
  • Clear coat

Wear protective gear

Before you start spray painting your golf cart, it’s important to wear the proper protective gear.

This includes a respirator or mask to avoid inhaling harmful fumes, gloves to protect your hands, and goggles to keep paint out of your eyes.

It’s also a good idea to cover any exposed skin with a long-sleeved shirt or pants or you can wear a proper paint suit. Once you have your protective gear on, you’re ready to start painting!

Prepare the area around

In order to spray paint your golf cart, you will need to first prepare the area around it.

This means that you will need to clear away any debris or objects that could potentially get in the way of the paint job.

Once you have a clear area to work in, you will need to set up a drop cloth or tarp to protect the ground from paint.

Once you have done all of this, you are ready to begin to spray painting your golf cart!

Clean the surface

Spray painting a golf cart is a simple process, but there are a few things you need to do to ensure a quality finish.

First, clean the surface with soapy water. This will remove any dirt or debris that could prevent the paint from adhering properly.

Sand the golf cart

To ensure that your golf cart is properly prepped for spray painting, you’ll need to sand it down first. Begin by using coarse-grit sandpaper to remove any existing paint or rust.

Once the majority of the paint is gone, switch to finer-grit sandpaper to smooth out the surface. Be sure to sand evenly to avoid creating any unevenness in the final paint job.

Select paint

When selecting paint for spray painting a golf cart, there are a few things to consider. The first is the type of paint. There are two main types of paint, water-based and oil-based.

Water-based paint is typically cheaper and easier to clean up, but it doesn’t adhere as well to surfaces and can be more difficult to work with.

Oil-based paint is more expensive and can be more difficult to clean up, but it adheres better to surfaces and is easier to work with.

The second thing to consider is the color. The most popular colors for golf carts are white, black, and red.

spray paint a golf cart

However, there are a wide variety of colors available, so it’s important to choose one that will look good with the rest of the cart.

The third thing to consider is the finish. There are three main types of finishes, glossy, semi-gloss, and matte.

Glossy finishes are the most popular and look the best, but they can be more difficult to maintain. Semi-gloss and matte finishes are less popular, but they’re easier to maintain.

Once you’ve considered all of these factors, you’re ready to choose the paint for your golf cart.

Acrylic spray paint is one of the best options for painting a golf cart. It is durable and can withstand the elements, making it ideal for use on an outdoor vehicle.

Acrylic paint also has a high level of pigmentation, meaning it will provide good coverage and a vibrant finish.

Apply primer

Before you begin spray painting your golf cart, it is important to apply primer to the surface. This will help to ensure that the paint adheres properly and provides a smooth, even finish.

To apply primer, first, make sure that the surface is clean and free of any dirt or debris. Next, apply a thin layer of primer using a paintbrush or roller.

Once the primer is dry, you can then begin applying the paint.

Spray paint golf cart

After you have applied primer to your golf cart, you will need to apply spray paint. The process to apply spray paint is this:

  1. Place the golf cart in a well-ventilated area.
  2. Use painter’s tape to tape off any areas you do not want to be painted.
  3. Shake the can of spray paint well before beginning.
  4. Begin painting the golf cart, using even strokes.
  5. Allow the paint to dry completely before removing the tape.

Apply clear coat

After you have completed your final paint job, it is important to apply a clear coat to protect the paint and to give the vehicle a high-gloss finish. Here are the steps you need to follow to apply a clear coat:

  • Make sure that the paint is completely dry before you begin. If it is not, the clear coat will not adhere properly and will not provide the desired protection.
  • If you are using an aerosolized clear coat, be sure to shake the can well before use.
  • Apply the clear coat in thin, even coats. Be sure to overlap each stroke to ensure full coverage.
  • Allow the clear coat to dry completely between each coat. This usually takes about 30 minutes.
  • Apply as many coats as necessary to achieve the desired results. A minimum of two coats is typically recommended.
  • Once the final coat is dry, you can buff it to a high shine with a soft cloth.

Clean up the area

After you have finished spray painting your golf cart, it is important to clean up the area to avoid any accidents or damage. First, remove any excess paint from the area using a rag or paper towel.

Next, use a mild soap and water solution to clean up any paint fumes or residue. Finally, make sure the area is well-ventilated to allow the paint to dry completely.

Is it hard to paint a golf cart?

Painting a golf cart can be challenging, but it is not necessarily difficult.

It is important to properly prepare the surface of the golf cart before painting, as this will ensure that the paint adheres well and looks good.

This may involve sanding the surface, cleaning it, and applying a coat of primer. Once the surface is prepared, you can apply the paint using a brush, roller, or spray gun.

It is also important to follow the manufacturer’s instructions for the paint you are using, as different paints have different application requirements.

How much paint do I need to spray a golf cart?

The amount of paint you need to spray a golf cart will depend on the size of the golf cart and the type of paint you are using.

As a general rule, you should plan on using about 1 gallon of paint for every 100 square feet of surface area.

Therefore, if your golf cart is about 100 square feet in size, you will need about 1 gallon of paint.

If your golf cart is larger or smaller, you will need to adjust the amount of paint accordingly.

It is also a good idea to have a little extra paint on hand in case you need to touch up any areas or if you make a mistake.

How do you paint a plastic golf cart body?

To paint a plastic golf cart body, you will need to follow these steps:

  • Clean the plastic surface thoroughly with soap and water to remove any dirt or debris.
  • Sand the plastic surface using medium-grit sandpaper to rough up the surface and help the paint adhere better.
  • Wipe the plastic down with a tack cloth or a clean, lint-free cloth to remove any dust from the sanding.
  • Apply a coat of plastic primer to the plastic surface using a brush, roller, or spray gun. Make sure to follow the manufacturer’s instructions for the primer you are using.
  • Once the primer is dry, apply the paint to the plastic surface using a brush, roller, or spray gun. Make sure to follow the manufacturer’s instructions for the paint you are using.
  • Allow the paint to dry completely before applying a second coat, if necessary.

It is important to use a plastic primer when painting a plastic golf cart body, as this will help the paint adhere better to the plastic surface.

It is also a good idea to use a paint specifically designed for use on plastic, as these paints are formulated to bond well with plastic surfaces.

What kind of spray paint to use on a golf cart?

There are several types of spray paint that can be used on a golf cart. Some options include:

  1. Acrylic enamel spray paint: This type of paint is a good choice for golf carts because it is durable and resistant to chipping and fading. It also dries to a glossy finish, which can make your golf cart look new again.
  2. Polyurethane spray paint: This type of paint is also very durable and resistant to chipping and fading. It dries to a high-gloss finish, which can give your golf cart a new, shiny appearance.
  3. Acrylic lacquer spray paint: This type of paint dries very quickly and can provide a high-gloss finish. It is also resistant to chipping and fading, but it may not be as durable as acrylic enamel or polyurethane paint.

Regardless of which type of spray paint you choose, it is important to follow the manufacturer’s instructions for application and drying times.

It is also a good idea to test the paint on a small, inconspicuous area of the golf cart before applying it to the entire surface to ensure that you are happy with the color and finish.


FAQ’s of How to spray paint a golf cart

To determine how many cans of spray paint you will need to paint a golf cart, you will need to know the dimensions of the cart. The average golf cart is six feet long and four feet wide. This means that you will need at least 24 square feet of coverage. Most cans of spray paint will cover about 25 square feet, so you will probably need at least two cans of paint.

You can most certainly paint your golf cart with spray paint! In fact, many people do just that in order to customize the look of their cart. Just be sure to use high-quality paint and primer specifically designed for automotive use. Also, be sure to prep the surface of your cart properly before painting. Otherwise, the new paint job may not adhere well and could start to peel over time.

The cost of changing the color of a golf cart can vary depending on the type of paint used and the size of the cart. For a small cart, using a basic paint, the cost may be as low as $100. However, for a larger cart or one that requires a more specialized paint, the cost could be as high as $1000.

To Plastidip a golf cart, it takes 4 cans. This is because Plastidip is a liquid form of vinyl wrap, and it requires 4 cans to cover the average golf cart.


Verdict on how to spray paint a golf cart

Well, there you have it, folks. I hope you enjoyed this blog post on how to spray paint a golf cart and I hope it provided everything you needed to know to get the job done right.

Contact me anytime if you have any questions or concerns by commenting. I am always available if you need help with something like spray painting anything.

And I will write a complete blog post on it.

I hope that you have a wonderful day and I look forward to your comments and questions below.

I will answer all of your queries so don’t hesitate and start bombing questions and clear your confusion.

 

Matthew Edward

Matthew Edward is a professional painter who loves to paint and wants to share useful tips and tricks which he had learned in many years of experience in painting. He also used many products that can be used for painting he has tried and tested each and every product to give an unbias opinion about it in his review. This blog is very useful for those newbies who want to learn painting without making mistakes.

Leave a Comment