How to paint joycons

In this guide, we will method the complete method to paint your joycons with an amazing finish.

This guide will provide you with the solution to paint joycons with step by step process so you better not miss any point explained in this guide. You can Paint joycons with best paint sprayers under $200 if you are tight on budget and can have great performance. You can also use best cordless spray guns for painting joycons I have used and tested the best.

paint joycons

My newbie painters tested this guide and analyzed great results and got their desired results which they wanted. If you are looking for best HVLP paint sprayers then I have used and tested the results of best ones and mentioned in my review. And If you are looking for paint sprayers for cars which are best in market I have mentioned the best ones

This guide will take you through the steps of painting a pair of JoyCon controllers.

This will make the controllers a custom color and make it easier to identify them when they are attached to the Switch console.

Tools you need to paint joycon controller

  • Spray paint or brush
  • Paint
  • Sandpaper (preferable 400-grit)
  • Primer
  • Protective gear
  • Goggles
  • Gloves
  • Face mask or respirator

Is it safe to paint a Nintendo switch?

Yes. It can be done as long as it is done properly.  There are a few different ways to paint your switch. The most durable is a spray paint. This is the best way to maximize the life of your switch.  

You can use similar colored spray paint to the one on your switch. This will allow you to match the color.  You can also use a paint brush if you would like.

The way to do this is to add a layer of clear coat. This will help protect the paint from rubbing off.

Sand the surface

When sanding your joycons, a great way to make sure you get them nice and evenly shined is to first start with 400 grit sandpaper.

Work your way higher up if you want an incredibly even finish. If not, as mentioned before, it’s completely optional.

Prime the joycons

Apply the primer evenly to both sides of the joycon. Let it dry for about 10 minutes, then give it a second coat if you want.

After you are done priming the joycons, do not put the face buttons back on until the primer has dried.

Paint the joycons

Spray paint is not the best thing for the joycons. It is best to use a brush to apply paint to it.

But you can use spray paint if you want. As the paint will settle easily, you should apply one coat of paint, let it dry, then apply another.

painting joycons

You need no primer for the paint or undercoat, because the paint is already going to have an undercoat.

Let it dry

Let the joycons controller dry for at least 24 hours and then check it if the paint is sticking to your finger or not.

It should not leave finger print mark on the painted surface because when you are playing you hold the controller with firm grip in order to achieve the best results in games.

Apply some pressure and check if the painted surface has any kind of marks on it. After the paint has dried completely attach the controller back if you had unscrewed the joycon.


Yes, you can paint your switch joycons, but be warned that it will void the warranty. But that doesn’t make it any less fun. The method is simple, and only takes about an hour if you follow the steps correctly. You will only need two things to paint your joycons: the Rit dye, and masking tape. Rit dye is the brand that I used, but there are a few different brands out there that should work just as well. *Disclaimer: I am not responsible for any damage done to your joycons while painting them. If you are not confident enough with painting or are worried that you may damage your joycons, then it is probably better to just buy some new ones.

Paint of any kind can cause damage to the Nintendo Switch, especially when it comes in direct contact with the device. If you want to paint your Nintendo Switch you have to be very careful with the paint. I have painted my Nintendo Switch before and I painted the dock and the joy cons. I was able to paint them because I didn’t put any kind of rough surface on the Nintendo Switch to get the paint on. I am also very careful when I take off the paint. The paint didn’t cause any damage to the Switch. If you want to paint your Nintendo Switch then avoid using heavy paint. I used a kind of water based paint which didn’t cause any damage to the Switch.

Yes, you can, but there are certain precautions that you need to take, to ensure that the paint doesn’t damage your device. The first thing to know is that the Nintendo Switch is made of plastic. Acrylic paint will only stick to it if the paint is diluted properly. If the paint is not diluted, it will mar the body of the device, but it probably will not damage the device. If the paint gets into the cracks and crevices, then the paint could damage the device’s electronics. So, if you want to use acrylic paint on your Nintendo Switch, then you need to be very careful about the paint not getting into the device. Use a soft brush to apply the paint on the device. Make sure that the brush is clean and doesn’t have any leftover paint from the previous use. Also, make sure the paint is diluted properly. This will help the paint to stick to the device better. Finally, let the paint dry completely before using your device.

Nintendo Switch Joy-Con includes a glossy part and matte part. If you want to make the glossy part matte, here is how: First you need to remove the back cover of the joy con by pulling it up. Then you need to remove the cover of the buttons and slide the cover of the joy con up. This is what it looks like after you remove the cover. Now you need to gently slide the cover off. It gets stuck on the board a little bit but can be easily slid out. Now you need to get a hair dryer and put it on high. Then you need to hold the hair dryer on the glossy part for about 5 seconds and then you will start to see the difference. After about 10 seconds the color of the glossy part will change. You can always put the back cover back if you don’t like it.

Final thoughts

This was the complete step by step guide which was based on my own experience which I have gained through these past years.

Don’t miss any step if you are a beginner because you can ruin the controller and then all the hard work will be gone in vain. If you still have any confusions regarding this guide then let me know in the comments section.

Leave a Comment